Back=right
mouse click.
Back=right
mouse click.
Administration > Network Configuration > Static Routes
Configure and deploy static route settings at Administration > Network Configuration > Static Routes. Both IPv4 and IPv6 address routes are supported. The Web UI accepts both IPv4 and IPv6 address formats as well.
Configure and deploy static route settings in this screen.
Note: Static routes can also be added during deployment and changed using the Administration > Deployment Wizard.
The following provides a brief description of the options in this screen.
Add—Opens the Static Routes screen, which allows you to create a new static route. You can add up to 50 static routes. If you bind a static route to an interface, the router setting must be in the same network segment as the interface.
Delete—Deletes a static route from the list.
Network ID—Click a Network ID to edit settings.
Netmask—Displays the subnet mask of the router for this route.
Router—Displays the IP address of the router for this route.
Interface—Displays the interface that binds to this route.
Deployment Status—Displays whether a static route is deployed successfully.
Click Deploy after specifying all the required settings.