The results page will let you know if your settings were entered successfully and
that IWSVA has been deployed. It will also indicate if your settings were not accepted.
The system checks deployment settings at the time of entry, before you move from one
page in the Deployment Wizard to the next. Successful results are the most common
outcome.
Deployment Status
This messages displays when your IWSVA deployment was successful with a status bar
that reflects the ongoing deployment of your mode settings.
"Congratulations! Your appliance has been set up and deployed.
You will be redirected to <IWSVA Web Console IP address> shortly. It may take several
minutes for the system to implement the new configuration changes and to restart before
allowing you to log in."
 |
Note
Trend Micro recommends you apply the latest software and/or OS updates for IWSVA as soon as you receive this message.
|
Even if your deployment is successful, you could receive a message indicating a problem
accessing the Web console. The message contains a suggestion on how to fix the problem.
See the following example:
"You designated DHCP protocol to configure the IWSVA network interface, which prohibits
the Deployment Wizard from finding the Web console IP address automatically. The IP
address and port number can be obtained from the IWSVA server display."
